SVN Main Menu

The main menu of the Syncro SVN Client is composed of the following menus:

File Menu

New submenu:

New File

This operation creates a new file as a child of the selected folder from the Repositories view tree or the Working Copy view tree, depending on the view that was last used. Note that for the Working Copy view, the file is added to version control only if the selected folder is under version control.

New Folder(Ctrl (Command on OS X) + Shift + F)

This operation creates a new folder as a child of the selected folder from the Repositories view tree or the Working Copy view tree, depending on the view that was last used. Note that for the Working Copy view, the file is added to version control only if the selected folder is under version control.

New External Folder (Ctrl (Command on OS X) + Shift + W)

This operation allows you to add a new external definition on the selected folder. An external definition is a mapping of a local directory to a URL of a versioned directory, and ideally a particular revision, stored in the svn:externals property of the selected folder.

Tip

You can specify a particular revision of the external item by using a peg revision at the end of the URL (for example, URL@rev1234). You can also use peg revisions to access external items that were deleted, moved, or replaced.

The URL used in the external definition format can be relative. You can specify the repository URL that the external folder points to by using one of the following relative formats:

• ../ - Relative to the URL of the directory that the svn:externals property is set.
• ^/ - Relative to the root of the repository in which the svn:externals property is versioned.
• // - Relative to the scheme of the URL of the directory that the svn:externals property is set.
• / - Relative to the root URL of the server in which the svn:externals property is versioned.

Important

To change the target URL of an external definition, or to delete an external item, do the following:

1. Modify or delete the item definition found in the svn:externals property that is set on the parent folder.
2. For the change to take effect, use the Update operation on the parent folder of the external item.

Note

Syncro SVN Client does not support definitions of local relative external items.

Open (Ctrl (Command on OS X) + O)

This action opens the selected file in an editor where you can modify it. The action is active only when a single item is selected. The action opens a file with the internal editor or the external application associated with that file type. This action works on any file selection from the Repositories view, Working Copy view, History view, or Directory Change Set view, depending on the view that was last used to invoke it. In the case of a folder, the action opens the selected folder with the system application for folders (for example, Windows Explorer on Windows or Finder on OS X, etc). Note that opening folders is available only for folders selected in the Working Copy view.

Open with(Ctrl (Command on OS X) + Shift + O)

Displays the Open with dialog box for specifying the editor in which the selected file is opened. If multiple files are selected only external applications can be used to open the files. This action works on any file selection from Repositories view, Working Copy view, History view, or Directory Change Set view, depending on the view that was last used to invoke it.

Show in Explorer/Show in Finder

Opens the parent directory of the selected working copy file and selects the file.

Save (Ctrl (Command on OS X) + S)

Saves the local file currently opened in the editor or the Compare view.

Save as

Saves any file selected in the Repositories, History, or Directory Change Set view.

Copy URL Location (Ctrl (Command on OS X) + Alt + U)

Copies the URL location of the resource currently selected in the Repositories view to clipboard.

Copy to

Copies the currently selected resource, either in Repositories or Working copy view, to a specified location.

Note

This action can also be used from History and Directory Change Set views to recover older versions of a repository item.

Move to(Ctrl (Command on OS X) + M)

Moves the currently selected resource, either in Repositories or Working copy view, to a specified location.

Rename(F2)

Renames the resource currently selected, either in Repositories or Working copy view.

Delete (Delete)

Deletes the resource currently selected either, in Repositories or Working copy view.

Locking:

• Scan for locks (Ctrl (Command on OS X) + L) - Contacts the repository and recursively obtains the list of locks for the selected resources. A dialog box containing the locked files and the lock description will be displayed. This is only active for resources under version control. For more details see Scanning for locks.

• Lock (Ctrl (Command on OS X) + K) - Allows you to lock certain files that need exclusive access. You can write a comment describing the reason for the lock and you can also force (steal) the lock. This action is active only on files under version control. For more details on the use of this action see Locking a file.

• Unlock (Ctrl (Command on OS X) + Alt + K) - Releases the exclusive access to a file from the repository. You can also choose to unlock it by force (break the lock).

Show SVN Properties (Ctrl (Command on OS X) + P)

Opens the Properties view and displays the SVN properties for a selected resource from Repositories view or Working Copy view, depending on the view that was last used to invoke it.

Show SVN Information (Ctrl (Command on OS X) + I)

Provides additional information for a selected resource. For more details, go to Obtain information for a resource.

Exit (Ctrl (Command on OS X) + Q)

Closes the application.

Edit Menu

Undo (Ctrl (Command on OS X) + Z)

Undo edit changes in the local file that is currently opened in the editor or the Compare view.

Redo (Ctrl (Command on OS X) + Y)

Redo edit changes in the local file that is currently opened in the editor or the Compare view.

Cut (Ctrl (Command on OS X) + X)

Cut selection from the local file that is currently opened in the editor view or the Compare view to clipboard.

Copy (Ctrl (Command on OS X) + C)

Copy selection from the local file that is currently opened in the editor or the Compare view to clipboard.

Paste (Ctrl (Command on OS X) + V)

Paste selection from clipboard into the local file that is currently opened in editor or the Compare view.

Find/Replace (Ctrl (Command on OS X) + F)

Perform find and replace operations in the local file that is currently opened in the editor or the Compare view.

Find Next (F3)

Go to the next match using the same find options of the last find operation. This action runs in the editor panel and in any non-editable text area (for example, the Console view).

Find Previous (Shift + F3)

Go to the previous match using the same find options of the last find operation. This action runs in the editor panel and in any non-editable text area (for example, the Console view).

Repository Menu

New Repository Location (Ctrl + Alt + N (Command + Alt + N on OS X))

Displays the Add SVN Repository dialog box. This dialog box allows you to define a new repository location.

Add SVN Repository Dialog Box

If the Validate repository connection option is selected, the URL connection is validated before being added to the Repositories view.

Edit Repository Location (Ctrl + Alt + E (Command + Alt + E on OS X))

Context-dependent action that allows you to edit the selected repository location using the Edit SVN Repository dialog box. It is active only when a repository location root is selected.

Change the Revision to Browse (Ctrl + Alt + B (Command + Alt + B on OS X))

Context-dependent action that allows you to change the selected repository revision using the Change the Revision to Browse dialog box. It is active only when a repository location root is selected.

Remove Repository Location (Ctrl + Alt + R (Command + Alt + R on OS X))

Allows you to remove the selected repository location from the view. It shows you a confirmation dialog box before removal. It is active only when a repository location root is selected.

Refresh (F5)

Refreshes the resource selected in the Repositories view.

Check out (Ctrl + Alt + O (Command + Alt + O on OS X))

Allows you to create a working copy from a repository directory, on your local file system. To read more about this operation, see the section Check out a working copy.

Export

Opens the Export dialog box that allows you to configure options for exporting a folder from the repository to the local file system.

Import:

Import folder (Ctrl + Shift + L (Command + Shift + L on OS X))

Allows you to import the contents of a specified folder from the file system into the selected folder in a repository. To read more about this operation, see the section Importing resources into a repository.

Note

The difference between the Import folder and Share project actions is that the latter also converts the selected directory into a working copy.

Import Files (Ctrl + Shift + I (Command + Shift + I on OS X))

Imports the files selected from the files system into the selected folder in the repository.

Working Copy Menu

( on OS X)Working Copies Manager

Opens a dialog box with a list of working copies that the Apache Subversion™ client is aware of. In this dialog box you can add existing working copies or remove those that are no longer needed.

Switch to

Selects one of the following view modes: All Files, Modified, Incoming, Outgoing, or Conflicts.

Refresh (F5)

Refreshes the state of the selected resources or of the entire working copy (if there is no selection).

Synchronize (Ctrl (Command on OS X) + Shift + S)

Connects to the repository and determines the working copy and repository changes made to the selected resources. The application switches to Modified view mode if the Always switch to 'Modified' mode option is selected.

Update (Ctrl (Command on OS X) + U)

Updates all the selected resources that have incoming changes to the HEAD revision. If one of the selected resources is a directory then the update for that resource will be recursive.

Update to revision/depth

Allows you to update the selected resources from the working copy to an earlier revision from the repository. You can also select the update depth for the current folder. You can find out more about the depth term in the sparse checkouts section.

Commit

Collects the outgoing changes from the selected resources in the working copy and allows you to choose exactly what resources to commit. A directory will always be committed recursively. Unversioned resources will be deselected by default. In the Commit dialog box you can also enter a comment before sending your changes to the repository.

Update all(Ctrl (Command on OS X) + Shift + U)

Updates all resources from the working copy that have incoming changes. It performs a recursive update on the synchronized resources.

Commit all

Commits all the resources with outgoing changes. It is disabled when Incoming mode is selected or the synchronization result does not contain resources with outgoing changes. It performs a recursive commit on the synchronized resources.

Revert (Ctrl (Command on OS X) + Shift + V)

Undoes all local changes for the selected resources. It does not contact the repository and the files are obtained from Apache Subversion™ pristine copy. It is enabled only for modified resources. See Revert your changes for more information.

Edit conflict (Ctrl (Command on OS X) + E)

Opens the Compare editor, allowing you to modify the content of the currently conflicting resources. For more information about editing conflicts, see Edit conflicts.

Mark Resolved (Ctrl (Command on OS X) + Shift + R)

Instructs the Subversion system that you resolved a conflicting resource. For more information, see Merge conflicts.

Mark as Merged (Ctrl (Command on OS X) + Shift + M)

Instructs the Subversion system that you resolved the pseudo-conflict by merging the changes and you want to commit the resource. Read the Merge conflicts section for more information about how you can solve the pseudo-conflicts.

Override and Update

Drops any outgoing change and replaces the local resource with the HEAD revision. This action is available on resources with outgoing changes, including conflicting ones. See the Revert your changes section.

Override and Commit

Drops any incoming changes and sends your local version of the resource to the repository. This action is available on conflicting resources. For more information see Drop incoming modifications.

Mark as copied

You can use this action to mark an item from the working copy as a copy of an other item under version control, when the copy operation was performed outside of an SVN client. The Mark as copied action is available when you select two items (both the new item and source item), and it depends on the state of the source item.

Mark as moved

You can use this action to mark an item from the working copy as being moved from another location of the working copy, when the move operation was performed outside of an SVN client. The Mark as moved action is available when you select two items from different locations (both the new item and the source item that is usually reported as missing), and it depends on the state of the source item.

Mark as renamed

You can use this action to mark an item from the working copy as being renamed outside of an SVN client. The Mark as renamed action is available when you select two items from the same directory (both the new item and the source item that is usually reported as missing), and it depends on the state of the source item.

Add to "svn:ignore" (Ctrl (Command on OS X) + Alt + I)

Allows you to add files that should not participate in the version control operations inside your working copy . This action can only be performed on resources not under version control. It actually modifies the value of the svn:ignore property in the parent directory of the resource. Read more about this in the Ignore Resources Not Under Version Control section.

Add to version control (Ctrl (Command on OS X) + Alt + V)

Allows you to add resources that are not under version control. For further details, see Add Resources to Version Control section.

Remove from version control

Schedules selected items for deletion from repository upon the next commit. The items are not removed from the file system after committing.

Clean up (Ctrl (Command on OS X) + Shift + C)

Performs a maintenance cleanup operation on the selected resources from the working copy. This operation removes the Subversion maintenance locks that were left behind. This is useful when you already know where the problem originated and want to fix it as quickly as possible. It is only active for resources under version control.

Expand All (Ctrl (Command on OS X) + Alt + X)

Displays all descendants of the selected folder. The same behavior is obtained by double-clicking a collapsed folder.

Collapse all (Ctrl (Command on OS X) + Alt + Z)

Collapses all descendants of the selected folder. The same behavior is obtained by double-clicking a expanded folder.

Compare Menu

Perform Files Differencing

Looks for differences between the two files displayed in the left and right side panels.

Next Block of Changes (Ctrl + Period (Command + Period on OS X))

Jumps to the next block of changes. This action is disabled when the cursor is positioned on the last change block or when there are no changes.

Note

A change block groups one or more consecutive lines that contain at least one change.

Previous Block of Changes (Ctrl + Comma (Command + Comma on OS X))

Jumps to the previous block of changes. This action is disabled when the cursor is positioned on the first change block or when there are no changes.

Next Change (Ctrl + Shift + Period (Command + Shift + Period on OS X))

Jumps to the next change from the current block of changes. When the last change from the current block of changes is reached, it highlights the next block of changes. This action is disabled when the cursor is positioned on the last change or when there are no changes.

Previous Change (Ctrl + Shift + Comma (Command + Shift + M on OS X))

Jumps to the previous change from the current block of changes. When the first change from the current block of changes is reached, it highlights the previous block of changes. This action is disabled when the cursor is positioned on the first change or when there are no changes.

Last Change (Ctrl + E (Command + E on OS X))

Jumps to the last change.

First Change (Ctrl + B (Command + B on OS X))

Jumps to the first change.

Copy All Changes from Right to Left

Copies all changes from the file in the right panel to the file in the left panel.

Copy Change from Right to Left

Copies the selected difference from the file in the right panel to the file in the left panel.

Show Word Level Details

Provides a word-level comparison of the selected change.

Show Character Level Details

Provides a character-level comparison of the selected change.

Format and Indent Both Files (Ctrl + Shift + P (Command + Shift + P on OS X))

Formats and indents both files before comparing them. Use this option for comparisons that contain long lines that make it difficult to spot differences.

Note

When comparing two JSON files, the Format and Indent Both Files action will automatically sort the keys in both files the same to make it easier to compare.

Ignore Whitespaces

Enables or disables the whitespace ignoring feature. Ignoring whitespace means that before performing the comparison, the application normalizes the content and trims its leading and trailing whitespaces.

History Menu

Show History(Ctrl (Command on OS X) + H)

Displays the history for a SVN resource at a given revision. The resource can be one selected from the Repositories view, Working Copy view, or from the Affected Paths table from the History view, depending on which view was last focused when this action was invoked.

Show Annotation (Ctrl + Shift + A (Command + Shift + A on OS X))

Opens the Show Annotation dialog box that computes the annotations for a file and displays them in the Annotations view, along with the history of the file in the History view.

Repositories

This operation is available for any resource selected from view, Working Copy view, History view or Directory Change Sets view, depending on which view was last focused when this action was invoked.

Revision Graph (Ctrl (Command on OS X) + G)

This action allows you to see the graphical representation of a resource's history. For more details about a resource's revision graph see the section Revision Graph. This operation is enabled for any resource selected into the Repositories view or Working Copy view.

Tools Menu

Share project

Allows you to share a new project using an SVN repository. The local project is automatically converted into an SVN working copy.

Branch / Tag

Allows you to copy the selected resource from the Repositories view or Working Copy view to a branch or tag into the repository. To read more about this operation, see the section Creating a Branch / Tag.

Merge (Ctrl (Command on OS X) + J)

Allows you to merge the changes made on one branch back into the trunk, or vice versa, using the selected resource from the working copy. To read more about this operation, see the section Merging.

Switch (Ctrl (Command on OS X) + Alt + W)

Allows you to change the repository location of a working copy, or only of a versioned item of the working copy, within the same repository. It is available when the selected item of the working copy is a versioned resource, except for external items. To read more about this action, see the Switching the Repository Location section.

Relocate

Allows you to change the base URL of the root folder of the working copy to a new URL when the base URL of the repository changed. For example, if the repository itself was moved to a different server. This operation is only available for the root item of the working copy. To read more about this operation, see the Relocate a Working Copy section.

Create patch (Ctrl (Command on OS X) + Alt + P)

Allows you to create a file containing all the differences between two resources, based on the svn diff command. To read more about creating patches, see the section about patches.

Working copy format

This submenu contains the following two operations:

Upgrade

Upgrades the format of the currently loaded working copy to the newest one known by Syncro SVN Client. This allows you to benefit of all the new features of the client.

Downgrade

Downgrades the format of the currently loaded working copy to SVN 1.7 format. This is useful if you want to use older SVN clients with the current working copy, or, by mistake, you have upgraded the format of an older working copy to SVN 1.8.

Note

SVN 1.7 working copies cannot be downgraded to older formats.

See the section Working Copy Format to read more about this subject.

Options Menu

Preferences

Opens the Preferences dialog box.

Menu Shortcut Keys

Opens the Menu Shortcut Keys preferences page, where users can configure in one place the keyboard shortcuts available for menu items available in Syncro SVN Client.

Global Run-Time Configuration

Allows you to configure SVN general options, that should be used by all the SVN clients you may use:

• Edit 'config' file - In this file you can configure various SVN client-side behaviors.
• Edit 'servers' file - In this file you can configure various server-specific protocol parameters, including HTTP proxy information and HTTP timeout settings.

Export Options

Allows you to export the current options to an XML file.

Import Options

Allows you to import options you have previously exported.

Reset Options

Resets all your options to the default ones.

Reset Authentication

Resets the Subversion authentication information.

Window Menu

Show View

Allows you to select the view you want to bring to front.

Show Toolbar

Allows you to select the toolbar you want to be visible.

Enable flexible layout

Toggles between a fixed and a flexible layout. When the flexible layout is enabled, you can move and dock the internal views to adapt the application to various viewing conditions and personal requirements.

Reset Layout

Resets all the views to their default position.

Help Menu

Help (F1)

Opens the Help dialog box.

Use online help (Enabled by default)

If this option is enabled, when you select Help or press F1 while hovering over any part of the interface, Oxygen XML Author attempts to open the help documentation in online mode. If this option is disabled or an internet connection fails, the help documentation is opened in offline mode.

Show Dynamic Help view

Displays the Dynamic Help view.

Report Problem

Opens a dialog box that allows you to write the description of a problem that was encountered while using the application.

Support Center

Opens the Support Center web page in a browser.

Support Tools ⇒ Clipboard Inspector

Opens a dialog box that displays extensive details of all the transferable objects from the clipboard. This is helpful if you experience problems while copying content from other applications and pasting it into Oxygen XML Author. You can use the Copy button to copy all of this data and then paste it into an email to be sent to the Oxygen XML Author support team.

About

Opens the About dialog box.